Installing the Sweeper Kit on Your Mammotion YUKA Robot Mower

Transform your YUKA mower into a 2-in-1 mowing and sweeping machine with our step-by-step installation guide.

What's in the Box: YUKA Sweeper Kit Components

Before you begin, familiarize yourself with all the components included in your sweeper kit:

1. Counter weight - For steep properties
2. Spare battery - Extra power for sweeping operations
3. Sweeper mechanism - Main sweeping unit
4. Handle attachment
5. Basket with structural components - Collection system
6. All necessary screws and Allen key

Important: You'll need a screwdriver with both Phillips and hex/Allen key heads.

Step-by-Step Installation Guide

Phase 1: Installing the Additional Battery

1. Safety First: Power Off

   • Press and hold the power button on top for 10 seconds until all lights turn off
   • Ensure the mower is completely powered down before proceeding

2. Access the Battery Compartment

   • Flip the mower over onto its back
   • Locate the 6 screws between the two rear wheels
   • Important: Don't fully remove screws - unscrew until you hear them start to click

3. Prepare for Battery Installation

   • Carefully pull all cables to the side gently to avoid damage
   • Identify the ports: white plug with white connector, black with black

4. Insert the Battery

   • Position the battery with Mammotion logo facing the middle
   • Slide the battery in so screw holes align with ports below
   • Connect white plug to white port, black to black
   • Tighten all screws securely

5. Cable Management

   • Tuck black cables down as deeply as possible
   • Place white cables on top
   • Ensure no cables are pinched or obstructed

6. Seal the Compartment

   • Replace cover with sharp angle towards back, smooth angle towards front
   • Check gasket area is clean, no dirt present
   • Verify cables aren't pinched for proper seal
   • Tighten all screws firmly

Phase 2: Assembling the Sweeper Handle

1. Align Handle with Sweeper Unit

   • Match handle holes with corresponding holes on sweeper
   • Should slot straight on easily

2. Secure with Screws

   • Use the larger hex-head screws provided
   • Secure all four screws tightly

Phase 3: Constructing the Collection Basket

1. Basket Structure Assembly

   • Take basket lid and flip upside down
   • Grab the structural piece and slot into place
   • Ensure two slots line up properly

2. Attach Side Covers

   • Slot first cover over and screw in tightly
   • Adjust structure into correct position
   • Slot second cover over and secure

3. Roof Attachment

   • Line up start of plastic with clip start on cover
   • Press down firmly until you feel it click
   • Work your way around entire perimeter

4. Front Structure Installation

   • With basket upside down (cover facing down)
   • Slot front piece into plastic channel on top of bag
   • Rotate around and slide into two channels on sides
   • Ensure it sits firmly against front section

5. Final Basket Assembly

   • Position assembled basket over sweeper mount
   • It should sit securely in place

Phase 4: Attaching Sweeper to YUKA

1. Mount Sweeper Unit

   • Position sweeper over rear wheels of YUKA
   • Slot into place securely

2. Connect Power

   • Grab power plug and connect to YUKA
   • Should click into place securely

Phase 5: Optional Counterbalance Weight

When to use: Recommended for properties with steep slopes
Purpose: Adjusts weight profile to prevent wheelies on inclines

Installation:

1. Remove white cap from top (just in front of camera)
2. Screw counterbalance weight onto mounting point
3. This provides additional stability on challenging terrain

Removal Process

Need to remove the sweeper? Here's how:

1. Disconnect Power: Push button to release plug
2. Remove Sweeper: Press yellow button and lift up and off
3. Store Components: Keep all parts together for easy reinstallation

Estimated Installation Time

First-time installation: 10-15 minutes
Subsequent installations: 5-10 minutes (once familiar with process)

Safety Tips & Best Practices

✅ Always power down mower before working on it
✅ Handle cables gently to prevent damage
✅ Ensure tight seals on battery compartment
✅ Test sweeper on flat ground first before slopes
✅ Store components together when not in use

Maximizing Your YUKA's Capabilities

With the sweeper kit installed, your YUKA transforms into a versatile 2-in-1 machine:

• Mowing: Perfect for regular lawn maintenance
• Sweeping: Ideal for autumn leaves, grass clippings, light debris
• Seasonal transitions: Easily switch between functions as needed
• Multi-surface handling: Adapts to different lawn conditions